Get HP Customer Support To Align Your HP Printer
HP Printer
is the best printing solutions available in the market with full computer
compatibility. It offers the best and quality services to the home user, personal
or even for daily users. Before do a print job with such printing machine, you
should align the numbers of paper into the tray and then take the printout. When
printer ink fails to line up correctly on the printed page, or your printer
appears an “alignment failed” error message, it’s likelythat your HP printer is
out of alignment. You can align the printer by just aligning your ink
cartridges, resetting the printer, or using a different type of paper.Here you
will get all entire solutions of this problem. So, instead of looking for HP
Customer Support, you can get effective ideas
over here. Hence, read the blog and try to understand the methods mentioned
here.
Methods To Align Your HP Printer
Glimpse at
once on the noted points and follow the instructions in the same way:
Method 1: Align Ink Cartridges
To do so,
follow the given instructions:
·
Power-on your HP computer first
·
Now, load a A-4 size of plain white
paper into the input tray
·
Launch “HP Solution Center” application
on your PC
·
Click on the “Settings” button,
then select “Print Settings”
·
Click on “Printer Toolbox”
·
From the “Printer Services”
section, click “Align the Print Cartridges”
·
After that tap on “Align” and then
follow the on-screen instructions to rectify your printer and properly align
the cartridges
Method 2: Reset The Printer
If the
above information is not enough to make alignment of your HP printer, then go
through the next method that is given here:
·
Turn-on your HP computer first
·
While keeping the printer
powered-on, disconnect the power cord from the back of your printer
·
Unplug the printer’s power cord
from the wall outlet
·
Wait for a few seconds and then
plug the power cord back into the wall outlet
·
Reconnect the power cord from the
back-side of your printing machine
·
Now, press the power button to
turn-on the printer
·
At the end, print the test page to
verify that your printer is now properly aligned
In case,
this method also doesn’t work, then jump to the next provided method. It will
surely be helpful for you. So, try once.
Method 3: Use The Right Paper
Make sure
that you are using the correct type of paper. To check it out, follow the
below-noted steps:
·
First, remove all the paper that is
already been inserted into the tray
·
Examine the paper and make sure
that it is clean and unused
·
If finding any photo, color or used
paper, remove out instantly
·
Now, touch the right arrow and
select “Setup” from your printer’s control panel
·
Select “tools”
·
Touch the down arrow and select
“Align Printer”
·
Open the top lid of your printer
and place the alignment test page on the scanner glass
·
Insert the piece of paper along the
front right corner of the scanner glass
·
Now, close the lid of your printer
and press “OK”
·
Now, print a test page and assure
that your printer is now properly aligned
For Instant Handy Solution, Dial HP Customer Support Number
Don’t feel
dishearten! If you are still unable to align your HP printer in an accurate way
as we have tech-specialists to eradicate your problem. Make cold conversation
with them by simply placing a call at HP
Customer Support Number. A one-stop with efficacy solution will be
delivered at your door-step.
Comments
Post a Comment